Cisco Cisco Packet Data Interworking Function (PDIF)
LTE Peer Map Configuration Mode Commands
precedence ▀
Command Line Interface Reference, StarOS Release 18 ▄
7151
peer-ip-address ip_address | ip_address/mask
Specifies the IP address of the peer node.
ip_address
must be specified using the standard IPv4 dotted decimal notation or colon notation for IPv6.
ip_address/mask
must be specified using the standard IPv4 dotted decimal notation or colon notation for
IPv6, followed by the mask.
serving-plmnid mcc mcc mnc mnc
Specifies serving nodes with criteria matching the PLMN ID (MCC and MNC) are to be associated with a
specified peer map.
specified peer map.
mcc mcc
: Specifies the mobile country code (MCC) portion of the PLMN ID.
mcc
must be a three-digit number between 100 and 999.
mnc mnc
: Specifies the mobile network code (MNC) portion of the PLMN ID.
mnc
must be a two- or three-digit number between 00 and 999.
Usage
Use this command to map LTE Policy to a peer profile based on matching criteria and precedence for the
criteria.
A maximum of 1024 precedence entries can be configured.
criteria.
A maximum of 1024 precedence entries can be configured.
Example
The following command associates the peer profile named pp5 with peers associated with a serving node
PLMN ID MCC of 111 and an MNC of 222:
PLMN ID MCC of 111 and an MNC of 222:
precedence 100 match-criteria serving-plmnid mcc 111 mnc 222 peer-
profile-name pp5
profile-name pp5