Cisco Cisco Packet Data Interworking Function (PDIF)

ページ / 9109
PCC-Service-Profile Configuration Mode Commands   
▀  timeout long-duration 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
7806 
   
 
disconnect
: sets the system to send SNMP TRAP and CORBA notification and disconnect the 
subscriber session once the long duration timeout timer is expired. 
Usage 
Use this command to set the long duration timeout period and actions to be taken on expiry of duration of 
timer for subscriber session. 
Important:
  Reduce the timeout duration to free session resources faster for use by new requests. 
Important:
  In case of long-duration timeout configured at PCC Service Configuration mode as well as at the 
PCC-Profile Configuration mode level, the long-duration timeout and action set in PCC-Profile Configuration mode will 
prevail. This enables defining session behavior as per profile provisioning. 
Example
 
Following command sets the system to detect the subscriber sessions that exceeds the long duration timer of 
6000 seconds and sends SNMP TRAP and CORBA notification: 
timeout long-duration 6000 action detection 
Following command sets the system to detect and disconnect the subscriber sessions that exceeds the long 
duration timer of 6000 seconds and disconnect the session after sending SNMP TRAP and CORBA 
notification: 
timeout long-duration 6000 action disconnect