Cisco Cisco Packet Data Interworking Function (PDIF)
Subscriber Configuration Mode Commands
▀ npu qos
▄ Command Line Interface Reference, StarOS Release 18
8908
The system can be configured to determine the priority of a subscriber packet either based on the
configuration of the subscriber, or from the differentiated service (DS) field in the packet's TOS octet
(representing the differentiated service code point (DSCP) value).
Refer to the System Administration Guide for additional information on NPU QoS functionality.
configuration of the subscriber, or from the differentiated service (DS) field in the packet's TOS octet
(representing the differentiated service code point (DSCP) value).
Refer to the System Administration Guide for additional information on NPU QoS functionality.
Important:
This functionality is not supported for use with the PDSN at this time.
Example
The following command configures the subscriber’s priority queue to be gold:
npu qos traffic priority gold