Cisco Cisco ASR 5700
Call Control Profile Configuration Mode
▀ local-cause-code-mapping no-active-bearers
▄ Command Line Interface Reference, StarOS Release 17
1994
local-cause-code-mapping no-active-bearers
Configures the reject cause code to send to a UE when the context received from a peer SGSN (during a TAU
procedure) does not contain any active PDP contexts.
procedure) does not contain any active PDP contexts.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
local-cause-code-mapping no-active-bearers emm-cause-code { eps-service-not-allowed-in-
this-plmn | network-failure | no-bearers-active | no-suitable-cell-in-tracking-area |
plmn-not-allowed | roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed
}
this-plmn | network-failure | no-bearers-active | no-suitable-cell-in-tracking-area |
plmn-not-allowed | roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed
}
remove local-cause-code-mapping no-active-bearers
remove local-cause-code-mapping no-active-bearers
Removes the configured cause code mapping.
no-active-bearers emm-cause-code { eps-service-not-allowed-in-this-plmn |
network-failure | no-bearers-active | no-suitable-cell-in-tracking-area | plmn-
not-allowed | roaming-not-allowed-in-this-tracking-area | tracking-area-not-
allowed }
network-failure | no-bearers-active | no-suitable-cell-in-tracking-area | plmn-
not-allowed | roaming-not-allowed-in-this-tracking-area | tracking-area-not-
allowed }
Specifies the EPS Mobility Management (EMM) cause code to return when no active PDP context exists.
eps-service-not-allowed-in-this-plmn
network-failure
no-bearers-active
no-suitable-cell-in-tracking-area
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area
tracking-area-not-allowed