Cisco Cisco ASR 5700
PCC-QoS-Profile Configuration Mode Commands
max-bitrate ▀
Command Line Interface Reference, StarOS Release 17 ▄
7685
max-bitrate
This command defines the Maximum Bit Rate (MBR) value in bits per second for downlink and uplink traffic in PCC-
QoS-Profile which is to use for Subscriber profile in PCC-Service instance on IPCF node.
QoS-Profile which is to use for Subscriber profile in PCC-Service instance on IPCF node.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC QoS Profile Configuration
configure > context context_name > pcc-service service_name > qos-profile profile_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-qos-profile)#
Syntax
[no] max-bitrate downlink downlink_mbr uplink uplink_mbr
no
Removes the configured Maximum Bit Rate value set for PCC-QoS-Profile for PCC-Service instance on
IPCF node.
IPCF node.
downlink
downlink_mbr
Sets the Maximum Bit Rate allowed in downlink direction (from PCEF to UE) in bits per second for a PCC-
QoS-Profile which is to use for Subscriber profile in PCC-Service instance on IPCF node.
QoS-Profile which is to use for Subscriber profile in PCC-Service instance on IPCF node.
downlink_mbr
must be an integer from 0 through 104857600. A ‘zero’ value disables the downlink in
specified PCC-QoS-Profile.
uplink
uplink_mbr
Sets the Maximum Bit Rate allowed in uplink direction (from PCEF to PDN) in bits per second for a PCC-
QoS-Profile which is to use for Subscriber profile in PCC-Service instance on IPCF node.
QoS-Profile which is to use for Subscriber profile in PCC-Service instance on IPCF node.
uplink_mbr
must be an integer from 0 through 104857600. A ‘zero’ value disables the uplink in specified
PCC-QoS-Profile.
Usage
Use this command to define the Maximum Bit Rate value in bits per second for downlink and uplink traffic in
PCC-QoS-Profile which is to use for Subscriber profile in PCC-Service instance on IPCF node.
PCC-QoS-Profile which is to use for Subscriber profile in PCC-Service instance on IPCF node.
Example
Following command sets the
1024
bits per seconds as uplink MBR and
2048
bits per second as downlink
MBR in PCC-QoS-Profile instance on IPCF node.
max-bitrate downlink 2048 uplink 1024