Cisco Cisco ASR 5700
Subscriber Configuration Mode Commands
authorized-flow-profile-id ▀
Command Line Interface Reference, StarOS Release 17 ▄
8699
authorized-flow-profile-id
When a profile ID is requested by the Mobile Node (MN), this command sets the value that is authorized by the Access
Gateway (AGW).
Gateway (AGW).
Product
PDSN
ASN-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
authorized-flow-profile-id profile_id direction { bidirectional | forward | reverse }
no authorized-flow-profile-id profile_id
no
Removes the existing profile ID setting specified by
profile_id
.
profile_id
must be an integer from 0
through 65535.
authorized-flow-profile-id
profile_id
The profile ID number that is authorized for the current subscriber.
profile_id
must be an integer from 0
through 65535.
direction { bidirectional | forward | reverse }
This specifies in which data direction the profile ID should be applied.
bidirectional
: This profile ID pertains to both the forward and reverse directions.
forward
: This profile ID pertains to data going to the MN.
reverse
: This profile ID pertains to data coming from the MN.
Usage
Use this command to set the profile ID that the AGW will authorize for a subscriber.
Example
Set the profile ID for both directions to 3 for the current subscriber by entering the following command:
authorized-flow-profile-id 3 direction bidirectional