Cisco Cisco Packet Data Gateway (PDG)
IP VRF Context Configuration Mode Commands
mpls map-dscp-to-exp ▀
Command Line Interface Reference, StarOS Release 17 ▄
6527
exp
exp_bit_value
Specifies the final EXP bit value in MPLS header to which the final DSCP bit value 0 to 7 (represented in
eight values) coming from incoming traffic will be mapped.
eight values) coming from incoming traffic will be mapped.
exp_bit_value
is the value of EXP bit in MPLS header and must be an integer between 0 through 7.
Usage
Use this command to map the final DSCP value coming from incoming IP traffic to a final EXP value in
MPLS header. This mapping determines the QoS and service parameters to which the packet is assigned.
MPLS header. This mapping determines the QoS and service parameters to which the packet is assigned.
Example
The following command maps the DSCP value
3
(24 to 31) to EXP bit
3
in MPLS header:
mpls map-dscp-to-exp dscp 3 exp 3