Cisco Cisco Packet Data Gateway (PDG)
Session Trace Template Configuration Mode Commands
target-ne ▀
Command Line Interface Reference, StarOS Release 17 ▄
8401
s2b: Specifies that the interface where the trace will be performed is the S2b interface between
the PGW and an ePDG.
s2c: Specifies that the interface where the trace will be performed is the S2c interface between
the PGW and a trusted, non-3GPP access device.
s5: Specifies that the interface where the trace will be performed is the S5 interface between
the P-GW and the S-GW.
s6b: Specifies that the interface where the trace will be performed is the S6b interface between
the PGW and the 3GPP AAA server.
s8: Specifies that the interface where the trace will be performed is the S8b interface between
the PGW and the S-GW.
sgi: Specifies that the interface where the trace will be performed is the SGi interface between
the PGW and the PDN.
Available
target-interface
options for
sgw
are as follows:
all
gxc: Specifies that the interface where the trace will be performed is the Gx interface between
the PGW and the PCRF.
s11: Specifies that the interface where the trace will be performed is the S11 interface between
the MME and the S-GW.
s4: Specifies that the interface where the trace will be performed is the S4 interface between
the S-GW and the SGSN.
s5: Specifies that the interface where the trace will be performed is the S5 interface between
the P-GW and the S-GW.
s8: Specifies that the interface where the trace will be performed is the S8b interface between
the PGW and the S-GW.
Usage
The
target-ne
command is specific to Session Tracing. This command is available in the template for the
MME NE. This command initiates tracing towards other network elements. The
target-interface
specifies the interface for tracing for a specified NE.
Example
The following configures session tracing for the network element
pgw
and it's S8 interface:
target-ne pgw target-interface s8