Cisco Cisco Packet Data Gateway (PDG)
UDR Module Configuration Mode Commands
cdr ▀
Command Line Interface Reference, StarOS Release 17 ▄
8947
remove-file-after-transfer
: Retains a copy of the file even after it has been pushed or pulled to
another server.
use-harddisk
: Disables data storage on the SMC hard disk.
Important:
The
use-harddisk
keyword is available only on the ASR 5000 chassis.
purge { storage-limit storage_limit | time-limit time_limit } [ max-files
max_records_to_purge ]
max_records_to_purge ]
Specifies to purge/delete the UDR records based on "time" or "volume" limit.
When the configured threshold limit is reached on the hard disk drive, the records that are created
dynamically in the /mnt/hd-raid/data/records/ directory are automatically deleted. Files that are manually
created should be deleted manually.
When the configured threshold limit is reached on the hard disk drive, the records that are created
dynamically in the /mnt/hd-raid/data/records/ directory are automatically deleted. Files that are manually
created should be deleted manually.
storage-limit storage_limit
: Specifies to start deleting files when the specified megabytes of
space is used for storage.
storage_limit
specifies the volume limit for the record files, in megabytes, and must be an
integer from 10 through 143360.
time-limit time_limit
: Specifies to start deleting files older than the specified time limit.
time_limit
specifies the time limit for the record files, and must be an integer from 600 through
2592000.
max-files max_records_to_purge
: Specifies the maximum number of records to purge.
max_records_to_purge
can be 0, or an integer from 1000 through 10000. If the value is set to 0,
during each cycle, the records will be deleted until the purge condition is satisfied. If the value is set
between 1000 and 10000, during each cycle, the records will be deleted until either the purge
condition is satisfied or the number of records deleted equals the configured
between 1000 and 10000, during each cycle, the records will be deleted until either the purge
condition is satisfied or the number of records deleted equals the configured
max-files
value.
Default: 0
push-interval value
Specifies the transfer interval (in seconds) to push UDR/EDR files to an external file server.
value
must be an integer from 60 through 3600.
Default: 300
push-trigger space-usage-percent trigger_percentage
Specifies the UDR/EDR disk space utilization percentage, upon reaching which an automatic push is
triggered and files are transferred to the configured external server.
triggered and files are transferred to the configured external server.
trigger_percentage
specifies the UDR/EDR disk utilization percentage for triggering push, and must be
an integer from 10 through 80.
Default: 80%
Default: 80%
remove-file-after-transfer
Specifies that the system must delete UDR/EDR files after they are transferred to the external file server.
Default: Disabled
Default: Disabled