Cisco Cisco Packet Data Interworking Function (PDIF)
IPSG RADIUS Server Configuration Mode Commands
▀ w-apn
▄ Command Line Interface Reference, StarOS Release 17
6584
Usage
Use this command to configure the list of W-APN names that can be connected through DeWAG and the
default-gateway IP addresses to be used by UE for connecting to the W-APN network. During DHCP
signaling the configured default-gateway value will be notified to UE as the router. This command also
configures the subnet-mask to be used for the respective default-gateway IP address in order to find the
network prefix of the default-gateway.
Note that DeWAG will be acting as 'default-gateway' for the UE in its connected network.
default-gateway IP addresses to be used by UE for connecting to the W-APN network. During DHCP
signaling the configured default-gateway value will be notified to UE as the router. This command also
configures the subnet-mask to be used for the respective default-gateway IP address in order to find the
network prefix of the default-gateway.
Note that DeWAG will be acting as 'default-gateway' for the UE in its connected network.
Important:
This command can be configured a maximum of four times to configure four different APNs and the
corresponding default-gateways.
Example
The following command configures an APN named
apn123
with the default gateway IP address and mask
192.168.1.1/24
:
w-apn apn123 default-gw 192.168.1.1/24