Cisco Cisco Packet Data Gateway (PDG)
Firewall-and-NAT Access Ruledef Configuration Mode Commands
udp dst-port ▀
Command Line Interface Reference, StarOS Release 16 ▄
5043
port-map port_map
Specifies name of the port-map for the port range.
port_map
must be an alphanumeric string of 1 through 63 characters.
Usage
Use this command to specify an access ruledef to analyze user traffic based on destination UDP port.
Example
The following command creates an access ruledef for analyzing user traffic matching destination port for
UDP as
UDP as
10
:
udp dst-port = 10