Cisco Cisco Packet Data Interworking Function (PDIF)
QoS L2 Mapping Configuration Mode Commands
internal-priority ▀
Command Line Interface Reference, StarOS Release 16 ▄
7933
mpls-tc mpls_tc_value
Map to an MPLS traffic class.
mpls_tc_value
must be a Hexadecimal number between 0x0 and 0x7.
Usage
This command is used to map internal QoS priority with COS values.
Important:
The
internal-priority
CLI command also offers the ability to configure both 802.1p priority
and setting of DEI/CFI bit. This flexibility installation will treat the bit as DEI (drop eligibility indicator). However, for
installations that treat the bit as CFI (canonical format indicator), this should be set to 0. Otherwise, the packet will be
dropped.
installations that treat the bit as CFI (canonical format indicator), this should be set to 0. Otherwise, the packet will be
dropped.
Example
This command is used to map internal QoS priority with COS values.
internal-priority cos 0x2 color 0x1