Cisco Cisco Packet Data Interworking Function (PDIF)
SGSN Service Configuration Mode Commands
associate ▀
Command Line Interface Reference, StarOS Release 16 ▄
8333
Important:
Only one Gs service can be associated with a SGSN service. The Gs service should be configured
prior to issuing this command.
hss-peer-service
hss_svc_name
Associates an HSS peer service with this SGSN service.
hss_svc_name
specifies the name for a pre-configured HSS peer service to associate with the SGSN service
as an alphanumeric string of 1 through 63 characters. For more information about the HSS peer service, refer
to the hss-peer-service command in the Context Configuration Mode Commands chapter and the HSS Peer
Service Configuration Mode Commands chapter.
to the hss-peer-service command in the Context Configuration Mode Commands chapter and the HSS Peer
Service Configuration Mode Commands chapter.
Important:
Only one HSS peer service can be associated to a service in this release. The HSS peer service
should be configured prior to issuing this command.
map-service
map_svc_name
Associates a MAP service with this SGSN service.
map_svc_name
specifies the name for a pre-configured MAP service to associate with the SGSN service.
The MAP service is created with the map-service command in the Context Configuration Mode Commands
chapter. The MAP service provides Mobile Application Part (MAP) protocol support for the interface
between the SGSN and the HLR. For more information on the MAP service, refer to the MAP Service
Configuration Mode Commands chapter.
chapter. The MAP service provides Mobile Application Part (MAP) protocol support for the interface
between the SGSN and the HLR. For more information on the MAP service, refer to the MAP Service
Configuration Mode Commands chapter.
Important:
Only one MAP service can be associated with a SGSN service. The MAP service should be
configured prior to issuing this command.
network-global-mme-id-mgmt-db
On the S4-SGSN, associates a pre-configured network global MME ID management database with the SGSN
service. This enables operators to associate a single custom list of MME Group IDs for use in UMTS to E-
UTRAN handovers on the S4-SGSN. The global MME ID management database must be configured on the
S4-SGSN using the the network-global-mme-id-mgmt-dbcommand in LTE Policy Configuration Mode
before it can be associated with an SGSN service.
This command is available on the SGSN only if the SGSN S4 Interface license is enabled.
service. This enables operators to associate a single custom list of MME Group IDs for use in UMTS to E-
UTRAN handovers on the S4-SGSN. The global MME ID management database must be configured on the
S4-SGSN using the the network-global-mme-id-mgmt-dbcommand in LTE Policy Configuration Mode
before it can be associated with an SGSN service.
This command is available on the SGSN only if the SGSN S4 Interface license is enabled.
sgtp-service sgtp_svc_name
Associates an SGTP service with this SGSN service.
sgtp_svc_name
specifies the name for a pre-configured SGTP service to associate with the SGSN service
as an alphanumeric string of 1 through 64 characters. For more information on the SGTP service, refer to the
sgtp-service command in the Context Configuration Mode Commands chapter and/or the SGTP Service
Configuration Mode Commands chapter.
sgtp-service command in the Context Configuration Mode Commands chapter and/or the SGTP Service
Configuration Mode Commands chapter.
Important:
The SGTP service should be configured prior to issuing this command. Only one SGTP service can
be associated with an SGSN service. When co-locating an SGSN and an MME, the SGSN Service cannot be associated
with the same SGTP Service that is used by the MME.
with the same SGTP Service that is used by the MME.