Cisco Cisco Packet Data Gateway (PDG) プリント
AAA Server Group Configuration Mode Commands
▀ radius server
▄ Cisco ASR 5x00 Command Line Interface Reference
208
The
encrypted
keyword is intended only for use by the chassis while saving configuration scripts. The
system displays the
encrypted
keyword in the configuration file as a flag that the variable following the
key
keyword is the encrypted version of the plain text key. Only the encrypted key is saved as part of the
configuration file.
admin-status { disable | enable }
Enables or disables the RADIUS authentication, accounting, or charging server functionality and saves the
status setting in the configuration file to re-establish the set status at reboot.
status setting in the configuration file to re-establish the set status at reboot.
max max_messages
Specifies the maximum number of outstanding messages that may be allowed to the server.
max_messages
must be an integer from 0 through 4000.
Default: 256
max-rate max_value
Specifies the rate at which the authentication messages should be sent to the RADIUS server by a single
AAA manager task.
AAA manager task.
max_value
must be an integer from 0 through 1000.
Default: 0 (disabled)
oldports
Sets the UDP communication port to the old default for RADIUS communications to 1645.
priority priority
Specifies the relative priority of this accounting server. The priority is used in server selection for
determining which server to send accounting data to.
determining which server to send accounting data to.
priority
must be an integer from 1 through 1000, where 1 is the highest priority. When configuring two or
more servers with the same priority you will be asked to confirm that you want to do this. If you use the
-
noconfirm
option, you are not asked for confirmation and multiple servers could be assigned the same
priority.
Default: 1000
Default: 1000
probe
Enable probe messages to be sent to the specified RADIUS server.
no-probe
Disable probe messages from being sent to the specified RADIUS server. This is the default behavior.
probe-username user_name
The user name sent to the RADIUS server to authenticate probe messages.
user_name
must be an
alphanumeric string of 1 through 127 characters.
probe-password [ encrypted ] password password
The password sent to the RADIUS server to authenticate probe messages.
encrypted
: This keyword is intended only for use by the chassis while saving configuration scripts. The
system displays the
encrypted
keyword in the configuration file as a flag that the variable following the