Cisco Cisco Packet Data Gateway (PDG) プリント
ACS Charging Action Configuration Mode Commands
video cae-readdressing ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
419
video cae-readdressing
This command allows you to enable CAE (Content Adaptation Engine) re-addressing, allowing video traffic to be
fetched from the CAEs in the CAE group. The CAE is an optional component of the Mobile Videoscape.
fetched from the CAEs in the CAE group. The CAE is an optional component of the Mobile Videoscape.
Product
MVG
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Charging Action Configuration
active-charging service service_name > charging-action charging_action_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-charging-action)#
Syntax
[ no ] video cae-readdressing [ xheader-format xheader_format_name ]
no
Disables CAE re-addressing if previously configured.
video cae-readdressing
Enables CAE re-addressing, allowing video traffic to be fetched from the CAEs in the CAE group.
xheader-format xheader_format_name
Specifies an HTTP x-header (Extension header) format for readdressing. When specified, the MVG inserts a
destination IP address and TCP port number in a proprietary HTTP x-header in the HTTP request to the CAE.
The CAE uses this information to connect to the OS (Origin Server) to retrieve selected video clips for
adaptation.
destination IP address and TCP port number in a proprietary HTTP x-header in the HTTP request to the CAE.
The CAE uses this information to connect to the OS (Origin Server) to retrieve selected video clips for
adaptation.
xheader_format_name
must be an alphanumeric string of 1 through 63 characters.
Usage
Use this command to enable CAE re-addressing on the Mobile Video Gateway.
Example
The following command enables CAE re-addressing:
video cae-readdressing xheader-format format_1