Cisco Cisco Packet Data Interworking Function (PDIF)
show alcap
▀
▄ Statistics and Counters Reference, StarOS Release 16
3530
Field
Description
AAL2 Nodes
This group displays the information related to AAL2 node configured in ALCAP
service.
service.
Node name
Indicates the name of the AAL2 node configured in ALCAP service.
Point Code
Indicates the address of AAL2 node in SS7 point code notation.
Path id
Indicates the identity number of AAL2 path configured on this AAL2 node under
ALCAP service.
ALCAP service.
Routes
This group displays the information related to AAL2 routes configured for AAL2
path.
path.
AESA
Specifies the ATM Endpoint Service Address (AESA) in an ATM (or AAL2) network
to map with adjacent AAL2 node. The AESA is based on the generic network service
access point (NSAP) format. The ATM connection from HNB-GW terminates at this
point.
to map with adjacent AAL2 node. The AESA is based on the generic network service
access point (NSAP) format. The ATM connection from HNB-GW terminates at this
point.
Node id
Indicates the AAL2 node identity number used for routes in AAL2 path FSM.
ERQ timer
Indicates the maximum time, in seconds, configured for Timer_ERQ on the system to
wait for response from adjacent AAL2 node before reporting the failure of AAL2
Establish Request procedure. Configurable range is from 5 through 30 seconds and
default is 5 seconds.
wait for response from adjacent AAL2 node before reporting the failure of AAL2
Establish Request procedure. Configurable range is from 5 through 30 seconds and
default is 5 seconds.
REL timer
Indicates the maximum time, in seconds, configured for Timer_REL on the system to
waits for response from adjacent AAL2 node before reporting the failure of AAL2
Release Request procedure. Configurable range is from 2 through 60 seconds and
default is 2 seconds.
waits for response from adjacent AAL2 node before reporting the failure of AAL2
Release Request procedure. Configurable range is from 2 through 60 seconds and
default is 2 seconds.
RES timer
Indicates the maximum time, in seconds, configured for Timer_RES on the system to
waits for response from adjacent AAL2 node before reporting the failure of AAL2
Reset Request procedure. Configurable range is from 2 through 60 seconds and
default is 2 seconds.
waits for response from adjacent AAL2 node before reporting the failure of AAL2
Reset Request procedure. Configurable range is from 2 through 60 seconds and
default is 2 seconds.
BLO timer
Indicates the maximum time, in seconds, configured for Timer_BLO on the system to
waits for response from adjacent AAL2 node before reporting the failure of AAL2
Path Block procedure. Configurable range is from 2 through 60 seconds and default is
2 seconds.
waits for response from adjacent AAL2 node before reporting the failure of AAL2
Path Block procedure. Configurable range is from 2 through 60 seconds and default is
2 seconds.
UBL timer
Indicates the maximum time, in seconds, configured for Timer_UBL on the system to
waits for response from adjacent AAL2 node before reporting the failure of AAL2
Path Un-Block procedure. Configurable range is from 2 through 60 seconds and
default is 2 seconds.
waits for response from adjacent AAL2 node before reporting the failure of AAL2
Path Un-Block procedure. Configurable range is from 2 through 60 seconds and
default is 2 seconds.