Cisco Cisco Aironet 350 Wireless LAN Client Adapter
4
Release Notes for Cisco Aironet Client Utilities 2.72 and Driver 2.72 for Windows CE
OL-10423-01
Important Notes
GTK2 Packet Not Transmitted by PSC Handheld Device
If you turn a PSC handheld device on and off several times at a rapid rate, the device can still associate,
but it cannot authenticate. The client device does not obtain an IP address and cannot function. If the
device is in such a state, wait a few seconds in the On state and then powercycle the device.
but it cannot authenticate. The client device does not obtain an IP address and cannot function. If the
device is in such a state, wait a few seconds in the On state and then powercycle the device.
Microsoft PEAP Issue for PPC 2002 Devices
Microsoft PEAP may not function properly on PPC 2002 devices.
Microsoft PEAP and Fast Reconnect
Microsoft PEAP does not support fast reconnect. Any interruption to the session requires the user to
re-enter his or her credentials.
re-enter his or her credentials.
Note
The ACS backend server cannot be configured for fast reconnect.
Recommendation for EAP-TLS
Cisco recommends connecting Windows CE devices to an EAP-TLS network only when the devices have
the proper certificate import tools for your network.
the proper certificate import tools for your network.
Note
These certificate import tools are not necessarily provided by Cisco.
Using Client Adapters with Both Windows and Windows CE Devices
After you install Cisco Aironet client adapter Install Wizard 1.0 or later on a Windows computer, the
firmware of any client adapter that is inserted into that computer may be automatically upgraded to the
version included in the Install Wizard file. If you insert a client adapter that has been upgraded to
firmware version 5.02.19 or later into a Windows CE device, the adapter functions only if the device is
running client utility and driver release 2.30 or later for Windows CE.
firmware of any client adapter that is inserted into that computer may be automatically upgraded to the
version included in the Install Wizard file. If you insert a client adapter that has been upgraded to
firmware version 5.02.19 or later into a Windows CE device, the adapter functions only if the device is
running client utility and driver release 2.30 or later for Windows CE.
Supporting Documentation
Version OL-1375-05 of the Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and
Configuration Guide for Windows CE pertains specifically to client utility and driver releases 2.60, 2.70,
and 2.72. If you are using, installing, or upgrading to an older release of client adapter software, refer to
a previous version of this manual for information and instructions.
Configuration Guide for Windows CE pertains specifically to client utility and driver releases 2.60, 2.70,
and 2.72. If you are using, installing, or upgrading to an older release of client adapter software, refer to
a previous version of this manual for information and instructions.