Cisco Cisco WAP200E Wireless-G Exterior Access Point - PoE メンテナンスマニュアル
Chapter 6
Advanced Configuration
18
Wireless-G Exterior Access Point with Power Over Ethernet
AP Mode
On this screen you can change the Access Point’s mode of
operation. In most cases, you can keep the default setting
- Access Point. You may wish to change the Access Point’s
mode of operation if you want to use the Access Point as
a wireless repeater to extend the range of your wireless
network. You may also wish to change the Access Point’s
mode of operation if you want to use the Access Point as
a wireless bridge; for example, you can use two Access
Points in Wireless Bridge mode to connect two wired
networks that are in two different buildings.
operation. In most cases, you can keep the default setting
- Access Point. You may wish to change the Access Point’s
mode of operation if you want to use the Access Point as
a wireless repeater to extend the range of your wireless
network. You may also wish to change the Access Point’s
mode of operation if you want to use the Access Point as
a wireless bridge; for example, you can use two Access
Points in Wireless Bridge mode to connect two wired
networks that are in two different buildings.
AP Mode
The Access Point offers three modes of operation: Access
Point, Wireless Repeater, and Wireless Bridge. For the
Repeater and Bridge modes, make sure the SSID, channel,
and security settings are the same for the other wireless
access points/devices.
Point, Wireless Repeater, and Wireless Bridge. For the
Repeater and Bridge modes, make sure the SSID, channel,
and security settings are the same for the other wireless
access points/devices.
MAC Address
The MAC address of the Access Point is displayed here.
Access Point
The Mode is set to Access Point by default.
This connects your wireless PCs to a wired network. In
most cases, no change is necessary.
most cases, no change is necessary.
Allow wireless signal to be repeated by a
•
repeater
Select this option if you want to use another
wireless device to repeat the signal of this Access Point.
You will need to enter the MAC address(es) of the
repeating device(s). Up to 3 repeaters can be used.
You will need to enter the MAC address(es) of the
repeating device(s). Up to 3 repeaters can be used.
Wireless Repeater
When set to Wireless Repeater mode,
the Wireless Repeater is able to talk to up a remote access
point within its range and retransmit its signal. Click Site
Survey to select the access point that will have its signal
repeated by this Access Point or enter the MAC address of
the access point manually.
point within its range and retransmit its signal. Click Site
Survey to select the access point that will have its signal
repeated by this Access Point or enter the MAC address of
the access point manually.
Access Point
- Wireless
Repeater
Mode
Access Point
Desktop
Desktop
Laptop
Laptop
Internet
Modem
Switch
Wired LAN
Wireless Repeater Mode