Cisco Cisco WAP200E Wireless-G Exterior Access Point - PoE
4
Release Notes
•
System Up Time is not implemented in the correct format of days, hours,
minutes, and seconds.
minutes, and seconds.
Resolved Caveats in Release 2.0.0.27
•
Changed the GUI style to comply with Cisco’s look and feel.
•
Resolved open caveats in Release 1.20a.
•
Corrected OID and MIBs information.
•
Changed the prompt text of the login page.
•
Changed the host name. The host name now consists of a generic name
followed by the last 3 bytes of the device’s MAC address.
followed by the last 3 bytes of the device’s MAC address.
•
Changed the default SSID to ciscosb.
Open Caveats in Release 1.20a
•
While enabling SNMPv3, a user is required to enter the Get Community and
Set Community strings. These fields should be grayed out.
Set Community strings. These fields should be grayed out.
•
The Device Name parameters on the Setup window and the Administration
window are not synchronized.
window are not synchronized.
Resolved Caveats in Release 1.20a
•
The AP object identifier (OID) issue has been corrected.
•
The SNMPv3 support issue is resolved.
•
The RADIUS server is able to manage all VLANs on multiple BSSIDs,
including the AP Management VLAN.
including the AP Management VLAN.
Open Caveats in Release 1.19
•
The only VLAN the RADIUS server is able to manage is the AP Management
VLAN.
VLAN.