Cisco Cisco WAP561 Wireless-N Dual Radio Selectable Band Access Point メンテナンスマニュアル
Client Quality of Service
Policy Map
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
129
7
STEP 1
Select Client QoS > Policy Map in the navigation pane.
Policy Map
STEP 2
Enter a Policy Map Name The name can include from 1 to 31 alphanumeric characters and the
following special characters: hyphen, underscore, backslash, and colon. Spaces are not
allowed.
following special characters: hyphen, underscore, backslash, and colon. Spaces are not
allowed.
STEP 3
Click Add Policy Map. The page refreshes with additional fields for configuring the policy
map.
map.
STEP 4
In the Policy Class Definition area, ensure that the newly created policy map shows in the
Policy Map Name list.
Policy Map Name list.
STEP 5
In the Class Map Name list, select the class map to apply this policy.
STEP 6
Configure the parameters:
•
Police Simple—Establishes the traffic policing style for the class. The simple form of
the policing style uses a single data rate and burst size, resulting in two outcomes:
conform and nonconform. If you select this field, configure one of these fields:
the policing style uses a single data rate and burst size, resulting in two outcomes:
conform and nonconform. If you select this field, configure one of these fields:
-
Committed Rate—The committed rate, in Kbps, to which traffic must conform. The
range is from 1 to 1000000 Kbps.
range is from 1 to 1000000 Kbps.
-
Committed Burst—The committed burst size, in bytes, to which traffic must
conform. The range is from 1 to 204800000 bytes.
conform. The range is from 1 to 204800000 bytes.