Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE メンテナンスマニュアル
Client Quality of Service
Class Map
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
121
7
A DiffServ mask of 255.255.255.255 indicates that all bits are important, and
a mask of 0.0.0.0 indicates that no bits are important. The opposite is true
with an ACL wildcard mask. For example, to match the criteria to a single host
address, use a mask of 255.255.255.255. To match the criteria to a 24-bit
subnet (for example, 192.168.10.0/24), use a mask of 255.255.255.0.
a mask of 0.0.0.0 indicates that no bits are important. The opposite is true
with an ACL wildcard mask. For example, to match the criteria to a single host
address, use a mask of 255.255.255.255. To match the criteria to a 24-bit
subnet (for example, 192.168.10.0/24), use a mask of 255.255.255.0.
•
Destination IPv6 Prefix Length (IPv6 only)—The prefix length of the
destination IPv6 address.
destination IPv6 address.
•
IPv6 Flow Label (IPv6 only)—A 20-bit number that is unique to an IPv6
packet. It is used by end stations to signify QoS handling in routers (range 0
to 1048575).
packet. It is used by end stations to signify QoS handling in routers (range 0
to 1048575).
•
IP DSCP—See description under Service Type fields.
•
Source Port—Includes a source port in the match condition for the rule. The
source port is identified in the datagram header.
source port is identified in the datagram header.
If you select the field, choose the port name or enter the port number.
-
Select From List—Matches a keyword associated with the source port:
ftp, ftpdata, http, smtp, snmp, telnet, tftp, www.
ftp, ftpdata, http, smtp, snmp, telnet, tftp, www.
Each of these keywords translates into its equivalent port number.
-
Match to Port—Matches the source port number in the datagram header
to an IANA port number that you specify. The port range is from 0 to
65535 and includes three different types of ports:
to an IANA port number that you specify. The port range is from 0 to
65535 and includes three different types of ports:
0 to 1023—Well-Known Ports
1024 to 49151—Registered Ports
49152 to 65535—Dynamic and/or Private Ports
•
Destination Port—Includes a destination port in the match condition for the
rule. The destination port is identified in the datagram header.
rule. The destination port is identified in the datagram header.
If you select this field, choose the port name or enter the port number.
-
Select From List—Matches the destination port in the datagram header
with the selected keyword: ftp, ftpdata, http, smtp, snmp, telnet, tftp,
www.
with the selected keyword: ftp, ftpdata, http, smtp, snmp, telnet, tftp,
www.
Each of these keywords translates into its equivalent port number.
-
Match to Port—Matches the destination port in the datagram header
with an IANA port number that you specify. The port range is from 0 to
65535 and includes three different types of ports:
with an IANA port number that you specify. The port range is from 0 to
65535 and includes three different types of ports: