Cisco Cisco Aironet 1200 Access Point
9
Release Notes for Cisco Aironet Access Points for Cisco IOS Release 12.3(8)JEC1
OL-16115-01
New Features
•
Access point going down (rebooting)
•
Uplink down
•
Uplink failed
•
Radio failed
•
Rogue access point found.
The command syntax is as follows:
logging facility <facility name> event <event name> severity <severity level>
The facility name option has 4 options:
•
1. system
•
2. dot11
•
3. radius
•
4. link
The command is available only if one of the facility names is selected.
The event name selections depends on the facility name selected. Supported events and subevents for
the respective facilities are shown in the following table:
the respective facilities are shown in the following table:
The severity level specifies the maximum severity level to report and print a system logging message.
There are 8 severity levels available, which are shown in the following table:
There are 8 severity levels available, which are shown in the following table:
Facility Name
Event
Subevent
system
reload
–
dot11
uplink
radio
rogue ap
failed, down
failed
–
rogue ap
–
–
radius
down
up
up
–
link
interface
up-down, link-changed
Severity Level
Logging Severity Level Description
0. emergencies
System is unusable
1 alerts
Immediate action needed
2. critical
Critical conditions
3. errors
Error conditions
4. warnings
Warning conditions
5. notifications
Normal but significant conditions
6. informational
Informational messages
7. debugging
Debugging messages