Cisco Cisco Virtual Topology System 2.1 インストールガイド
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 25 of 26
IOS XRv Day Zero Configuration for High Availability
Additional Day 0 configuration is needed only if you plan on putting your VTCs on
different subnets. Otherwise, the rest of this section can be skipped.
different subnets. Otherwise, the rest of this section can be skipped.
1. Configure the IOS XRv Day Zero configuration.
• Hostname
• VRF Name
• Management IP (inside the VRF)
• Default Route under the VRF
• Enable Telnet for the VRF
• VRF Name
• Management IP (inside the VRF)
• Default Route under the VRF
• Enable Telnet for the VRF
On XRv 1
hostname XRVR1
telnet vrf VTS_VIP ipv4 server max-servers 10
vrf VTS_VIP
telnet vrf VTS_VIP ipv4 server max-servers 10
vrf VTS_VIP
address-family ipv4 unicast
!
!
interface GigabitEthernet0/0/0/1
!
interface GigabitEthernet0/0/0/1
vrf VTS_VIP
ipv4 address 172.20.111.28 255.255.255.0
ipv4 address 172.20.111.28 255.255.255.0
!
router static
vrf VTS_VIP
address-family ipv4 unicast
0.0.0.0/0 172.20.111.1
!
!
!
router static
vrf VTS_VIP
address-family ipv4 unicast
0.0.0.0/0 172.20.111.1
!
!
!