Cisco Cisco Prime Optical 9.6 開発者ガイド
Cisco Prime Optical 9.6.3 GateWay/CORBA Programmer Reference Guide
OL-28047-01
215
• TPDataList_T zEnd
– Supported.
• Reroute_T rerouteAllowed
– Not supported.
• NetworkRouted_T networkRouted
– Not supported.
• globaldefs::NVSList_T additionalInfo
– Supported. Customer ID and service ID are reported if they are available. For an SNC on
Ethernet equipment, Prime Optical reports all associated VLAN IDs. For a WDM SNC,
the sncSize is reported.
For OCHCC SNCs the frequency value associated to the OCHCC circuit refers to the active
path.Each OCH trail reports its own frequency value. It can be different for OCHtrail subtending
to the same OCHCC if the implemented protection is ‘splitter’ or ‘Y cable’ and the SNC is
GMPLS.
For OCHCC SNCs, GMPLS information, if any, is also reported. The following table lists the
For OCHCC SNCs, GMPLS information, if any, is also reported. The following table lists the
GMPLS information that could be reported.
Attribute Name
Type
Description
gmplsAcptThreshold
String
This threshold acceptance value is checked against the actual
optical value. The threshold acceptance value can assume one of
the following values:
optical value. The threshold acceptance value can assume one of
the following values:
•
Green
•
Yellow
•
Orange
•
Red
gmplsOptValid
String
The current optical valid value. The optical valid value can
assume one of the following values:
•
Green
•
Yellow
•
Orange
•
Red
gmplsRestorationState
String
Valid values are:
•
None
•
Revertible
•
Restoring
•
Restored
•
Failed
gmplsIgnorePathAlarms
String
Optional. Valid Values are: