Cisco Cisco Prime Optical 9.6 開発者ガイド
Cisco Prime Optical 9.6.3 GateWay/CORBA Programmer Reference Guide
OL-28047-01
218
• globaldefs::NVSList_T additionalInfo
Supported. Three parameters are sent in this field:
– A name/value pair for the IP address with the name “IPAddress.”
– A name/value pair for the operational state with the name “OperationalState,”
containing the following values. The emsInSyncState value is determined by the
OperationalState value. A state change event is generated whenever the state of
emsInSyncState changes.
OperationStates
EmsInSyncState
PreProvisioned
False
InServiceSyncConfiguration
False
OutOfService
False
UnderMaintenance
False
InServiceIntializing
False
InService
True
– A name/value pair for the vendor with the name “VendorName.”
In addtion to the preceding, the following parameters are available for a restricted group of
MEs:
• A name/value pair for the ME Description field with the name “Description.” It is an
• A name/value pair for the ME Description field with the name “Description.” It is an
editable, free text field. When modified, AVC notifications are not sent to GateWay/CORBA
clients.
• A name/value pair for the ME Latitude field with the name “Latitude.” It is an editable field
in the format “North/South <num> Deg <num> Min” (for example, “North 38 Deg 13 Min”).
When modified, AVC notifications are not sent to GateWay/CORBA clients.
• A name/value pair for the ME Longitude field with the name “Longitude.” It is an editable
field in the format “West/East <num> Deg <num> Min” (for example, “West 122 Deg 38
Min”). When modified, AVC notifications are not sent to GateWay/CORBA clients.
The following table lists the MEs that support these additional parameters:
Attribute Name
Supporting ME
Description
Latitude
Longitude
These attributes are read-only in
GateWay/CORBA. You must use the Prime
Optical client to edit them.
15454
15454 SDH
CPT 200
CPT 200 SDH
CPT 600