Cisco Cisco Prime Central 1.2 プリント
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Problem
Troubleshoot
Solution
Verify
Introduction
This document describes a step by step procedure to resolve database replication or
synchronization issue in Prime Network by rebuilding standby database from Primary database.
synchronization issue in Prime Network by rebuilding standby database from Primary database.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Use this procedure to rebuild secondary database only if SWITCHOVER_STATUS of primary
database is into UNRESOLVABLE GAP.
database is into UNRESOLVABLE GAP.
●
Ensure that the primary database is in READ WRITEand secondary database is in READ
ONLYor READ ONLY WITH APPLYmodes.
ONLYor READ ONLY WITH APPLYmodes.
●
Ensure that you identify correct primary and secondary Prime Central gateway/database.
●
Components Used
The information in this document is based on these software and hardware versions:
Prime Central release 1.2 and above
●
Oracle Database 11G release
●
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
Background Information
1. Use this command to know switchover_status of primary database: