Cisco Cisco Prime Network Services Controller Adaptor for DFA プリント
Modifying a DFA Network
Each DFA network can have associated network pools.
Step 1
On the menu bar, choose Physical > Network.
Step 2
In the left pane, click the Multi-domain Manager entry.
Step 3
Click the Dynamic Fabric Account entry.
Step 4
Click the DFA Network tab.
Step 5
Click a DFA network entry.
Step 6
Click Modify Network.
Step 7
In the Modify DFA Network dialog box, complete the following fields:
Description
Name
Name of the new network.
Network Name field
Currently selected role for Cisco DCNM.
Network Role field
Description of the network.
Description field
Network gateway address.
Gateway field
Network subnet address.
Subnet mask field
Choose the switch type.
Switch Type drop-down list
Choose a profile name.
Profile Name drop-down list
Profile Parameters section
IP address of the DHCP server.
DHCP Server Address field
If checked, enables the use of IPv6 addresses.
Enable IPv6 check box
IPv6 address field used by the gateway.
This field is visible only if the Enable IPv6 check
box is selected.
box is selected.
Note
Gateway IPv6 Address field
The length used by the IPv6 address.
This field is visible only if the Enable IPv6 check
box is selected.
box is selected.
Note
Prefix Length field
Network ID section
Segment Id of network. Not visible if the AutoSelect check
box is selected.
box is selected.
Segment Id field
Cisco UCS Director Dynamic Fabric Automation Management Guide, Release 4.1
44
OL-31406-02
Managing DFA Networks
Modifying a DFA Network