Cisco Cisco MCS 7828-I3 Unified Communications Manager Appliance データシート
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 2 of 7
System Error LEDs
The Cisco MCS 7825-I2-UC1 provides a system error LED and system locator LED on the front of the server to make pinpointing system problems
easier than ever. When a system error occurs, this indication is made on the front panel of the Cisco MCS 7825-I2-UC1. If no failures have occurred,
the system error LED is not lit.
DAT Tape Drive Support
The Cisco MCS 7825-I2 can support an optional 36-/72-GB universal-serial-bus (USB) external Digital Audio Tape (DAT) drive. This tape drive
connects through the USB 2.0 port on the server. The 36/72-GB DAT drive is available as either an external tape drive (part number DAT-USB-
EXT-72=) or as a rack-mounted drive (part number DAT-USB-RM-72=).
PRODUCT SPECIFICATIONS
Table 1 gives product specifications of the Cisco MCS 7825-I2-UC1.
Table 1.
Product Specifications
Processor at Product Introduction
Processor (CPU)
Intel Pentium D dual core
Processor internal clock speed
2.8 GHz
Level 2 cache
4 MB
Maximum processors
1
Processors installed
1
Basic input/output system (BIOS) type
Flash memory
Memory
Memory maximum
8 GB
Memory bus clock
533 MHz
Memory technology
PC2-4200 DDR SDRAM
Bit-error mitigation
Error correction code (ECC)
Total RAM slots
4
Memory installed
2 GB (2 x 1 GB)
RAID Controller
Controller model
IBM mezzanine ServeRAID-8e Controller
Interface
Embedded to planar
Cache
No
Battery-backed write caching
No
RAID levels supported
1
Hard Disk
Hard disk installed
2 x 80 GB
Hard disk route processor module (RPM)
7200
Hard disk interface type
SATA