Philips Wi-Fi component Hi-Fi system MCI730 MCI730/05 ユーザーズマニュアル
製品コード
MCI730/05
21
Wired connection
Connect to the router by using the Ethernet
cable
cable
1
Select
2
Use an Ethernet cable to connect the unit
to the router.
Connect to the home network
On the unit, select
•
[Wired (Ethernet)].
The unit starts to acquire an IP address
»
assigned by the network automatically.
A message appears when the
A message appears when the
»
connection is completed successfully.
MCi730
LAN4
To Modem
12V=1A
Reset
LAN3
LAN2
LAN1
3
Select the desired Wi-Fi network.
4
As prompted, enter the encryption key to
the network.
The unit starts to acquire an IP
»
address assigned by the Wi-Fi network
automatically.
A message appears when the
automatically.
A message appears when the
»
connection is completed successfully.
Note
The router may fail to assign an IP address,
•
if the DHCP (Dynamic Host Configuration
Protocol) is unavailable or disabled on the
router.
Protocol) is unavailable or disabled on the
router.
Enter key
Successfully
connected to
Network A
English
EN