Cisco Cisco D9804 Multiple Transport Receiver インストールガイド
Setup Menu
78-4042990-01 Rev B
77
Menu Item
Description
Parameters
System Warning
Name
Name
Displays a list of the warning
messages. You can scroll through the
list using the UP and DOWN Arrow
keys.
messages. You can scroll through the
list using the UP and DOWN Arrow
keys.
Enable - Yes or No. When set to Yes,
the warning message will be
reported. When set to No, the fault
won’t be reported.
the warning message will be
reported. When set to No, the fault
won’t be reported.
Note: Enable must be set to Yes for
the Relay and Trap settings to be
functional.
the Relay and Trap settings to be
functional.
Trp - Yes or No. When set to Yes, the
SNMP trap message will be sent to
the trap destination; otherwise the
warning message will be ignored.
SNMP trap message will be sent to
the trap destination; otherwise the
warning message will be ignored.
“No*” indicates the trap is enabled,
but Enable is set to No, which will
prevent trap operation.
but Enable is set to No, which will
prevent trap operation.
Setup Menu: Noise Cutoffs
To view the Noise Cutoffs menu from the Main menu, press the RIGHT Arrow key
once and then the SELECT key to reach the Setup menu. Then press the RIGHT
arrow key eight times and the SELECT key to view the Noise Cutoffs menu.
once and then the SELECT key to reach the Setup menu. Then press the RIGHT
arrow key eight times and the SELECT key to view the Noise Cutoffs menu.
The Noise Cutoffs menu has the following structure: