Cisco Cisco D9804 Multiple Transport Receiver インストールガイド
Chapter 5 Setup and Monitoring
120
78-4042990-01 Rev B
Configuring User Settings
Proceed as follows to configure your user settings:
1 From the user interface of the D9804 MTR, click the Setup tab, and then the User
1 From the user interface of the D9804 MTR, click the Setup tab, and then the User
Settings icon from the sub-page.
2 Set the Date Format. The following formats are supported: YYYY_MM_DD,
DD_MM_YYYY, MM_DD_YYYY, and MM_DD.
3 Select the Time Format. The following formats are supported: 24Hr, 24 Hr
SuspendZero (leading zero is dropped from the time), 12 Hr, 12 Hr SuspendZero
(leading zero is dropped from the time).
(leading zero is dropped from the time).
4 Set the GMT (Greenwich Mean Time) Offset. The time is displayed using a time
zone instead of the true local time. If the current broadcast time is not your local
time, you must change this time setting in the range from -12.0 to +12.0 hours in
1.0 hour increments.
time, you must change this time setting in the range from -12.0 to +12.0 hours in
1.0 hour increments.
5 Set the Lock Level (0, 1, 2, or 3) for the Front Panel, Web GUI and SNMP/MIB.
For more information on lock levels, see Appendix E - Lock Levels (on page 179).
6 Click Save.