Cisco PULSAR MKII - TV Modulator (BG) (PAL) データシート

ページ / 4
 
Model 9825M Modulator, Model 9825S Modulator w/ Integrated 
Stereo Encoder & Model 9815 Rear Interface Module (RIM) 
 
Model 9825M and Model 9825S Specifications 
Video Specifications 
Value 
Differential Gain 
≤ 1.5%  (1% typical)  at 87.5% modulation 
Differential Phase 
≤ 1.0°  (0.5° typical) at 87.5% modulation 
Frequency Response 
± 0.5 dB, 10 Hz to 4.15 MHz (-1.5 dB maximum at 4.2 MHz) 
Video S/N 
≥ 70 dB from 10 kHz to 4.2 MHz, weighted 
Chrominance -to- luminance gain inequality  
≤ ± 4.5% (2.5% typical) 
Chrominance -to- luminance delay inequality 
≤ ± 40 nsec  (-20 nsec typical) 
Chrominance -to- luminance intermodulation 
≤ ± 0.5% 
Chrominance nonlinear gain 
≤ ± 0.5% 
Chrominance nonlinear phase 
≤ ± 0.5° 
K-factor – 2T Pulse 
≤ 2.0% (1.0% typical) 
Group delay response 
Meets FCC Predistortion No. 73.687 for color transmission 
ICPM 
≤ 1.0° p-p 
Mono Audio Specifications, Model 9825M 
Value 
Input level  
-15 dBm to +15 dBm for 25 kHz deviation @ 400 Hz input 
S/N Ratio 
≥ 70 dB ± 25 kHz deviation (ref @ 400 Hz) 
Frequency Response 
≤ 0.5 dB p-p (0.3 dB p-p typical) from 30 Hz to 15 kHz (75 
µsec pre-emphasis)  
Total Harmonic Distortion 
≤ 0.30% from 30 Hz to 15 kHz @ 25 kHz deviation 
Stereo Audio Specifications Model 9825S 
Value 
Input Level (L, R, & optional SAP) 
- 15 to +15 dBm for 100% modulation at 400 Hz input 
Audio input impedance 
600 
Ω Balanced or high impedance (selectable) 
Audio common mode hum rejection 
≥ 40 dB  
Frequency Response (left, right) 
≤ ± 0.4 dB (30 Hz to 14.5 kHz) and ≤ -3 dB @ 15 kHz 
S/N Ratio 
≥ 68 dB at 100% input (reference @ 400 Hz & 0 dBm input) 
Stereo Separation  (10% to 100% EIM) 
≥ 35 dB from 50 Hz to 14 kHz (typically 40 dB) 
Distortion (left and right) 
≤ 0.3%  30 Hz to 7.5 kHz at 100% input 
Distortion (optional SAP) 
≤ 0.5%  30 Hz to 5.0 kHz at 100% input 
4.5 MHz Subcarrier output level 
39 to 41 dBmV 
 
 
RF Output Specifications 
Value 
Output frequency 
50-870 MHz  (fully agile) 
Channel plans 
Standard, IRC, HRC, Special Frequency Plans (SFP) 
Frequency stability 
≤ ± 5 kHz (with internal reference) 
Combined C/N up to 137 channels 
≥ 65 dB 
 Carrier phase noise  
(Measured at 1 Hz bandwidth) 
≤ -95 dBc @ 1 kHz offset  
≤ -101 dBc @ 10 kHz offset 
≤ -101 dBc @ 20 kHz offset 
Output Level 
+50 dBmV to +61 dBmV 
Spurious Outputs 
≤ -63 dBc (-65 dBc typical) relative to +60 dBmV video 
carrier and audio carrier at +45 dBmV 
Composite IF Specification 
Value 
Output Level 
36 dBmV 
± 2dB with video IF input level @ 47 dBmV 
Vestigial sideband response 
≤ -20 dB at channel edge 
≤ -45 dB at adjacent video audio carrier frequencies and all 
frequencies farther removed from channel. 
General Specifications 
Value 
Power Dissipation 
Model 9825M 35 Watts 
Model 9825S 39 Watts 
Operating temperature range 
0
°C to 50°C (32°F to 122°F) 
Shipping Weight 
Modulator:  8 lbs (3.6 kg) 
9815 RIM:  3 lbs (1.4 kg)