Cisco PULSAR MKII - TV-Modulator (DK) (PAL) データシート
Introduction
The Continuum
Headend System product family provides
users with a vertically-oriented, compact, full featured
ensemble of headend functions. The Model 9811 and 9814
Controllers manage all activities between application modules
in addition to supporting external monitoring and control.
ensemble of headend functions. The Model 9811 and 9814
Controllers manage all activities between application modules
in addition to supporting external monitoring and control.
Description
All Continuum configurations require one controller and its
corresponding rear interface module per chassis. The Model
9811 and 9814 Controller Modules support all chassis level
functions required by any combination of application modules.
A controller and its Model 9801 or 9802 Rear Interface
Module (RIM) provide access to vital system connections
such as AC or DC power input, all back-up connections,
Transmission Network Control System (TNCS) connections,
and alarm interfacing. The controller also directs setup and
control of all application modules.
corresponding rear interface module per chassis. The Model
9811 and 9814 Controller Modules support all chassis level
functions required by any combination of application modules.
A controller and its Model 9801 or 9802 Rear Interface
Module (RIM) provide access to vital system connections
such as AC or DC power input, all back-up connections,
Transmission Network Control System (TNCS) connections,
and alarm interfacing. The controller also directs setup and
control of all application modules.
Model 9811/9814 Controller Modules are required to take advantage of the additional features and capabilities of
the Continuum Series 9825 Modulators. The Model 9811/9814 controllers are fully compatible with all versions of
Continuum Application Modules and can be used in place of Model 9810/9813 Controller Modules if required.
the Continuum Series 9825 Modulators. The Model 9811/9814 controllers are fully compatible with all versions of
Continuum Application Modules and can be used in place of Model 9810/9813 Controller Modules if required.
Note: Existing Model 9810/9813 Controller Modules need not be upgraded to Model 9811/9814 Controllers unless
Continuum Series 9825 Modulator Modules are present in that respective chassis. However, Model 9810/9813
Controllers can be upgraded to Model 9811/9814 Controller compatibility if necessary. Contact Scientific-Atlanta
factory service for details.
Continuum Series 9825 Modulator Modules are present in that respective chassis. However, Model 9810/9813
Controllers can be upgraded to Model 9811/9814 Controller compatibility if necessary. Contact Scientific-Atlanta
factory service for details.
Features
Controller:
• Model 9811 Controller supports AC and DC powering
• Model 9814 Controller supports dual DC (-48 V DC) powering
• Expanded memory for new Model 9825M and 9825S Modulators
• Supports all Continuum Headend System application modules
• Microprocessor control and configuration
• Front panel remote terminal access (RS-232)
• 57.15 mm x 25.40 mm (2.25 in. x 1 in.) LCD display for all configuration and control functions
• Supports application module automatic back-up
• Plug & Play capability
• Universal AC powering with DC back-up input or dual DC powering
• Power factor corrected AC power supply
•
Mechanically improved connector system
Rear Interface Module
• Interface for universal AC powering with DC back-up input or dual DC powering
• Back-up bus access supports external back-up control and large back-up groups (more than eight application
modules) with TNCS
• Provides SMC access to all application modules in the chassis (RS-485 and TTL)
Analog Headend
Continuum
Headend System
Model 9811 and 9814 Controllers
Model 9801 and 9802 Rear Interface Modules
Model 9801 and 9802 Rear Interface Modules
T22621