Cisco Headend System Release 2.5 インストールガイド
78-738190-01 Rev B
SR 2.5 and SR 3.5 UniPack Pre-Upgrade Procedures
1-7
Back Up the Database,
Continued
9. If you are using a custom tape drive configuration, type
/cdrom/cdrom0/s3/backup_restore/backupDatabase -b [blocksize]
-s [tapesize] and then press Enter.
Note: Substitute the blocksize and tapesize that pertain to your system for
Note: Substitute the blocksize and tapesize that pertain to your system for
[blocksize] and [tapesize].
Example:
Example:
/cdrom/cdrom0/s3/backup_restore/backupDatabase -b 128 -s 13212058
Result: The system displays the following message:
Result: The system displays the following message:
Please mount tape 1 on /dev/rmt/0h and then press Return to continue.
10. Press Enter.
Result: The system backs up your Informix database.
Notes:
•
Notes:
•
The system will prompt you to insert additional tapes if your backup
requires more than one tape.
•
The message Successfully completed the database backup appears when
the backup has completed successfully.
•
If the database backup was not successful, the system displays an error
message. Contact Cisco Services for assistance in resolving the error
message.
11. Type eject cdrom and then press Enter.
12. Remove the CD and tape(s) and store them in a safe place.
12. Remove the CD and tape(s) and store them in a safe place.