Cisco Headend System Release 2.7
Add Another BFS QAM to the DNCS
4017541 Rev B
17
Note: All of this information should be recorded on your network map. However, if
it is not, contact your system administrator to obtain the information.
it is not, contact your system administrator to obtain the information.
To add another BFS QAM to the DNCS, complete all of the instructions in this
section in the order in which they appear.
section in the order in which they appear.
Setting up Basic Parameters for the BFS QAM
The first step in adding another BFS QAM is to set up the basic parameters for the
BFS QAM.
1 On the DNCS Administrative Console, click the DNCS tab.
2 Click the Network Element Provisioning tab.
3 Click QAM. The QAM List window opens.
BFS QAM.
1 On the DNCS Administrative Console, click the DNCS tab.
2 Click the Network Element Provisioning tab.
3 Click QAM. The QAM List window opens.
4 On the File menu, select New and click QAM. The Set Up QAM window opens
with the Basic Parameters tab in the forefront.
5 Click the Headend Name arrow and select the headend in which this service
QAM resides.