Cisco Headend System Release 2.7
Decide Binding Type
736107 Rev D
31
Turning Off Autobinding
1 On the DNCS Administrative Console, select the DNCS tab and then select one
1 On the DNCS Administrative Console, select the DNCS tab and then select one
of the following tabs based on the system release you have installed:
For SR 2.5/3.5/4.0 and earlier, select the Element Provisioning tab.
For SR 2.7/3.7/4.2 and later, select the Home Element Provisioning tab.
2 Click CableCARD. One of the following opens based on the System Release
your system uses:
For SR 2.7/3.7/4.2 and earlier, the CableCARD Data Summary screen opens.
For SR 2.7.1/3.7.1/4.2.1, the CableCARD Filter screen opens.
3 Click Configure CableCARD Server. The CableCARD Data Summary screen
updates to display the Configure CableCARD Server portion of the screen.
4 Enter the following information into the appropriate fields within the Configure
CableCARD Server screen:
IP Address—Type all zeros for the IP Address: 0.0.0.0
Port Number—Type a zero for the Port Number: 0
Example: The following illustration is an example of a Configure CableCARD
Server screen from SR 4.2.1. Screens in previous System Releases might look
different.
5 Click Save CableCARD Server Configuration on the left side of the screen to
save these parameters.