Cisco Headend System Release 2.7
Chapter 2 Install the Services Portal
40
78-745238-01 Rev D
Install Pace Set-Top Support
Follow the instructions in this section to set up support for the Pace set-tops, which
requires the following steps:
1 Acquire the ptv file from the FTP server.
2 Copy the ptv file to the correct directory.
3 Set up the BFS client for the Pace ptv file.
4 Set up the SAM service for the Pace ptv file.
This section contains procedures for each of these steps.
1 Acquire the ptv file from the FTP server.
2 Copy the ptv file to the correct directory.
3 Set up the BFS client for the Pace ptv file.
4 Set up the SAM service for the Pace ptv file.
This section contains procedures for each of these steps.
Acquiring and Copying the Pace ptv File to the Correct Directory
1 In the Application Server xterm window, type cd /export/home/dncs/download
1 In the Application Server xterm window, type cd /export/home/dncs/download
and press Enter.
2 Log on to the FTP server.
Notes:
The address of the server is ftp.sciatl.com or 192.133.243.133.
Note: The address for the FTP server is subject to change. If you are unable to
Note: The address for the FTP server is subject to change. If you are unable to
reach the FTP server, please contact Cisco Services for the latest address.
The username is anonymous.
The password is the e-mail address of the person logging in.
3 Type cd /pub/scicare/RELEASED/ServicesPortal/Pace and press Enter.
4 Type bin and press Enter. The system sets the ftp transfer mode to binary.
5 Type hash and press Enter. The system configures itself to display hash marks
4 Type bin and press Enter. The system sets the ftp transfer mode to binary.
5 Type hash and press Enter. The system configures itself to display hash marks
that show file-transfer progress.
6 Type prompt and press Enter. This command turns off the interactive mode of
the FTP utility.
7 Type get ispguid.ptv and press Enter.
Note: This command starts the transfer of the file from the FTP server to the
Application Server. A # symbol displays on the screen for each 8192 bytes
transferred from the FTP server to the Application Server or DNCS.
8 When the download is complete, type bye and press Enter to log out of the FTP
server.