Cisco Headend System Release 2.5
Chapter 4 Post-Upgrade Procedures
76
4000916 Rev C
4 Type metastat | more and then press Enter. The system displays the status of
all of the metadevices on the DNCS.
Note: Press the Spacebar, if necessary, to page through all of the output.
Note: Press the Spacebar, if necessary, to page through all of the output.
5 Examine the output from the metastat command for the following two
conditions, and then go to step 6:
The designation ok appears in the State column next to each metadevice.
No Hot Spare indicates In Use.
6 Are both of the conditions described in step 5 true?
If yes (to both conditions), go to step 7; disk mirroring was successfully
enabled.
enabled.
If no (to either or both conditions), call Cisco Services for help in resolving
the issues with disk mirroring.
the issues with disk mirroring.
7 In the xterm window from which you ran the mirrstate –a command, type eject
cdrom and then press Enter. The system ejects the DBDS Maintenance CD.
8 Type exit and then press Enter to close the xterm window.