Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split インストールガイド

 

38 

 

 

 

3  Loosen the strand clamp bolts to separate the clamps enough to insert the strand, 

but do not remove them. Then lift the housing into proper position on the strand. 

4  Slip the clamps over the strand and finger-tighten the clamp bolts. This allows 

additional side-to-side movement of the housing as needed. 

5  Move the housing as needed to install the coaxial cable and connectors. See the 

illustrations below for an example 
Powered from Left 
 

 

 
Powered from Right