Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split インストールガイド
Status Monitor Configuration Procedure
4024769 Rev A
29
Result: The handheld terminal attempts to identify the device type of the
transponder. If recognized, terminal application "HMS_TpApp3.app", software
number 530526, is loaded into the handheld terminal's memory and the
transponder configuration menu items are available. If the handheld terminal's
screen does not illuminate, make sure that its plug is fully inserted into the local
control port on the module.
Note: If the handheld terminal cannot identify the device type, or cannot find its
associated terminal application, the transponder configuration menu items will
not load. Refer to the handheld programming terminal's download kit user
documentation.
2 Select menu item 3 - RX Frequency.
a Enter the downstream frequency, in MHz, on which the transponder will
receive commands from the headend.
3 Select menu item 6 - TX Level.
a Enter the desired output power level for the transponder.
Note: The valid range is 24 dBmV to 50 dBmV.
4 Wait for communication to be established.
Note: Once the transponder is registered, the Receive LED on the SM remains
solid green, while the Heart Beat LED blinks slowly. Also, the SM configuration
menu item 8 - Status displays "Registered".
solid green, while the Heart Beat LED blinks slowly. Also, the SM configuration
menu item 8 - Status displays "Registered".
5 Configure the LCM/node by one of the following methods.