Cisco Headend System Release 2.7 ユーザーガイド
Chapter 3 Understanding Diagnostic Screens
46
4000308 Rev B
Accessing the Diagnostic Screens Using the DNCS Web Browser
Starting with SARA version 1.21, you can use the Web browser on the DNCS to view
the diagnostics screens of any DHCT that is booted "two-way" (information can travel
to and from the headend) and accessible from that DNCS.
the diagnostics screens of any DHCT that is booted "two-way" (information can travel
to and from the headend) and accessible from that DNCS.
Complete the following steps to access the diagnostic screens from the DNCS.
1 Launch a Web browser that is installed on the DNCS.
2 Type http://<the.dhct.ip.address>:5030/1.html in the Address field located at the
1 Launch a Web browser that is installed on the DNCS.
2 Type http://<the.dhct.ip.address>:5030/1.html in the Address field located at the
top of your Web browser, and then press Enter. Your Web browser displays the
first diagnostic screen (Status Summary) of the DHCT you are using.
Note: In this command, <the.dhct.ip.address> represents the actual IP address of
the DHCT you are using.
first diagnostic screen (Status Summary) of the DHCT you are using.
Note: In this command, <the.dhct.ip.address> represents the actual IP address of
the DHCT you are using.
3 Follow the on-screen instructions and the links to view the other diagnostic
screens.