Cisco Headend System Release 2.5 インストールガイド
Chapter 3 Setting Up Hubs, MPEG Sources, MQAM Modulators, PCGs, and SCSs
38
4017650 Rev C
Important: You will need this number when you set up the SCS or MQAM
modulator.
modulator.
5 Click OK.
Results:
The system saves this information in the DNCS database and closes the Port
Number Prompt window.
Number Prompt window.
The Connectivity tab updates with the new port and transport stream
information.
information.
The Modify Port and Delete Port options become available.
Note: When you set up the associated program MQAM modulator, the system
will automatically complete the Connect To fields on this window.
will automatically complete the Connect To fields on this window.
6 Click Apply. The system saves the MPEG source information in the DNCS
database and updates the Connectivity illustration to include the new port
information.
information.
7 Is the MPEG source connected to another ASI input port on a program MQAM
modulator?
If yes, repeat steps 2 through 6. When finished, go to step 8.
If no, go to step 8.
8 Click Save.
Results:
The system saves the MPEG source information in the DNCS database and
closes the Set Up MPEG Source window.
closes the Set Up MPEG Source window.
The MPEG Source List window updates to include the new MPEG source.
9 Do you need to add another MPEG source?
If yes, go back to Setting Up MPEG Source Basic Parameters (on page 35).
If no, click File then choose Close to close the MPEG Source List window and
return to the DNCS Administrative Console. Go to step 10.
return to the DNCS Administrative Console. Go to step 10.
10 Do you want to modify an MPEG source?
If yes, go to Modifying an MPEG Source (on page 39).
If no, your next step is to add the SCS or the program MQAM modulator that
will be receiving data from this MPEG source. Depending on your
configuration, go to either Add a Program MQAM Modulator (on page 41) or
Add an SCS (on page 54).
will be receiving data from this MPEG source. Depending on your
configuration, go to either Add a Program MQAM Modulator (on page 41) or
Add an SCS (on page 54).
Note: If you want to delete an MPEG source, go to Deleting an MPEG Source (on
page 39).
page 39).