Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split インストールガイド
6
OL-29941-01
Upgrading the RF Split in the GS7000 Node
Upgrading the RF Split in the GS7000 Node
Use spare or in-stock RF module units to perform these steps to upgrade out-of-
service units. Then replace in-service RF modules with the upgraded RF module
units. Return the replaced RF modules to stock so that they can become the next
units for upgrade and swap procedures.
service units. Then replace in-service RF modules with the upgraded RF module
units. Return the replaced RF modules to stock so that they can become the next
units for upgrade and swap procedures.
CAUTION:
To prevent electrostatic discharge (ESD) to electronic equipment, take ESD
precautions, including the use of an ESD wrist or ankle strap or an anti-static
mat.
To prevent electrostatic discharge (ESD) to electronic equipment, take ESD
precautions, including the use of an ESD wrist or ankle strap or an anti-static
mat.
To Upgrade the RF Amp Module
1 From the top of the amplifier, remove the Reverse Configuration Module (RCM)
plug-in module from the RF Amp module.
Note: The RCM must be removed before removing the reverse amplifier board.