Cisco Headend System Release 2.7 インストールガイド
Convert MAC Addresses to POD IDs
740020 Rev H
199
Convert MAC Addresses to POD IDs
Introduction
Before using the podConvert utility to convert a list of CableCARD MAC Addresses
to CableCARD POD IDs, be sure that you know the following information:
to CableCARD POD IDs, be sure that you know the following information:
The directory on the DNCS into which the EMM delivery file is loaded
The directory on the DNCS into which the toc file is extracted
The output file name (and full path) into which you want the list of POD IDs
written
written
Converting MAC Address to POD ID
Follow these instructions to use the podConvert utility to convert CableCARD MAC
Addresses to CableCARD POD IDs.
1 If necessary, open an xterm window on the DNCS.
2 Type cd /export/home/dncs/[EMM delivery file directory]/[extracted file
Addresses to CableCARD POD IDs.
1 If necessary, open an xterm window on the DNCS.
2 Type cd /export/home/dncs/[EMM delivery file directory]/[extracted file
directory] and then press Enter. The directory in which the EMM toc file is
stored becomes the working directory.
Example: cd /export/home/dncs/ftp/SP00209081-COMPLETE
stored becomes the working directory.
Example: cd /export/home/dncs/ftp/SP00209081-COMPLETE
3 Type podConvert -T toc -P [file name] and then press Enter. The system
converts the CableCARD MAC Addresses into POD IDs and writes them to the
specified file.
Example: podConvert -T toc -P /tmp/POD_ID_[date].out
specified file.
Example: podConvert -T toc -P /tmp/POD_ID_[date].out