Cisco Headend System Release 2.7 インストールガイド
Stop and Disable Unneeded DNCS Processes
4035749 Rev B
85
3 From the dncs xterm window, type the following command and press Enter. The
dncsControl window opens.
dncsControl
4 Type 2 (Startup/Shutdown Single Group of Process) and press Enter.
5 Type 1 (dncs) and press Enter.
6 Type e (Display Groups) and press Enter.
7 Type 6 (DNCS DSM, BSM, SiMa) and press Enter.
8 Type e (Display Process Entries) and press Enter.
9 Type 6 (ocdlManager) and press Enter.
10 To stop the process, type 1 (stopped) and press Enter. The process status changes
5 Type 1 (dncs) and press Enter.
6 Type e (Display Groups) and press Enter.
7 Type 6 (DNCS DSM, BSM, SiMa) and press Enter.
8 Type e (Display Process Entries) and press Enter.
9 Type 6 (ocdlManager) and press Enter.
10 To stop the process, type 1 (stopped) and press Enter. The process status changes
to red in the DNCS Process Status tree.
11 Do you want to disable the process?
Note: Disabling the process removes the process from the DNCS Process Status
tree.
tree.
If yes, type 6 (ocdlManager) and press Enter and then type 4 (disabled) and
press Enter. The ocdlManager process is removed from the DNCS Process
Status tree.
press Enter. The ocdlManager process is removed from the DNCS Process
Status tree.
If no, go to step 12.
12 Repeat this procedure to stop/disable other processes, as needed.
Important: Once you get to step 7, the entries may change in order to view the
appropriate DNCS display group.
appropriate DNCS display group.
13 To exit the dncsControl window, type X (Return to Menu) until the dncsControl
window closes.