Cisco Headend System Release 2.5 インストールガイド
Chapter 3 SR i4.2.2 Common Upgrade Procedures
54
4036631 Rev B
Run the configureASI.pl Script
Complete this procedure only if the system you are upgrading already has the ASI
card installed. This procedure ensures that the ASI card is configured correctly.
1 As root user, type /dvs/dncs/bin/configureASI.pl and then press Enter.
card installed. This procedure ensures that the ASI card is configured correctly.
1 As root user, type /dvs/dncs/bin/configureASI.pl and then press Enter.
Result: The script checks for the presence of the ASI card and detects any
problems with how the card is configured. The script displays a message that
indicates the card is correctly configured, or it seeks confirmation regarding
correcting any problems the script finds.
problems with how the card is configured. The script displays a message that
indicates the card is correctly configured, or it seeks confirmation regarding
correcting any problems the script finds.
2 Did the script reveal any problems with how the ASI card is configured?
If yes, go to step 3.
If no, follow these instructions.
a Type shutdown -y -g0 -i6 and then press Enter. The system reboots.
a Type shutdown -y -g0 -i6 and then press Enter. The system reboots.
b After the system reboots, go to
Check the Status of the ASI Card (on page
3 Type y (if you want the script to correct configuration problems with the ASI
card) and then press Enter. The script modifies the configuration of the ASI card
and prompts you to reboot the DNCS.
and prompts you to reboot the DNCS.
4 Type shutdown -y -g0 -i6 and then press Enter. The system reboots.
5 Go to
5 Go to
Configure/Verify the ASI Card (on page 57).