Cisco Headend System Release 2.7 ユーザーガイド
Confirm the BFS Source for Switched Digital Services
4024447 Rev C
9
6 From the Source Name column, double-click SGM IB to open the Set Up BFS
Source window.
7 Is the Source field enabled?
If yes, go to step 8.
If no, click enable and then go to step 8.
8 Are you running 2.7.1/3.7.1 and 4.2.1 or later?
If yes, repeat step 7 for each source and then go to step 9.
If no, go to step 9.
9 Review the remaining fields in this window. Cisco recommends the following
values:
Source Type—BFS
Transport Type—ASI In-band
Data Rate—1.00
Block Size—4000
Indication Interval—100
Selected Hosts—dncsatm
10 Did you make any modifications to this window?
If yes, click Save and go to step 11.
If no, click Cancel.
11 Repeat steps 1–2 and record the current Session Count here: ______