Cisco Headend System Release 2.7 ユーザーガイド
Enable SDV Functionality for Specific Explorer Set-Tops and/or Tuning Adapters
4024447 Rev C
43
5 Click Save. The Set Up SAM Service window closes. The SAM Service List shows
the appended URL on the same line as the service you edited.
6 Click File and select Close to close the SAM Service List.
Authorizing DHCTs for a Package
Authorizing specific set-tops and tuning adapters for the SDV package enables these
set-tops and tuning adapters to receive the SDV SAM service and, in turn, enables
them for SDV functionality. Set-tops and tuning adapters that are not authorized for
the SDV package are not enabled for SDV functionality and are unable to display
SDV services. Complete the following instructions to authorize a set-top or tuning
adapter for the SDV service.
1 Click the Home Element Provisioning tab and then click DHCT. The DHCT
set-tops and tuning adapters to receive the SDV SAM service and, in turn, enables
them for SDV functionality. Set-tops and tuning adapters that are not authorized for
the SDV package are not enabled for SDV functionality and are unable to display
SDV services. Complete the following instructions to authorize a set-top or tuning
adapter for the SDV service.
1 Click the Home Element Provisioning tab and then click DHCT. The DHCT
Provisioning window opens.
2 Click Open and select one of the following options:
By MAC Address: Enter the MAC address for the set-top.
By IP Address: Enter the IP address for the set-top.
By Serial Number: Enter the serial number for the set-top.
3 Click Continue. The Set Up DHCT window opens for the test DHCT.