Cisco Cisco DOCSIS EuroDOCSIS Transponder for GainMaker Nodes インストールガイド
Cisco DOCSIS® /EuroDOCSIS™ Transponder for GainMaker Node
Mounting Instructions
Introduction
This document provides instructions for mounting the Cisco DOCSIS/EuroDOCSIS
Transponder for Cisco GainMaker Node.
Transponder for Cisco GainMaker Node.
For complete information on Safety Instructions, Installation and Operation of the
transponder, see the
transponder, see the
Cisco DOCSIS®/EuroDOCSIS™ Transponder for GainMaker Node
Installation and Operation Guide (I&O Guide), part number 4042915.
Transponder Mounting Location
The transponder module mounts in the lid of the GainMaker node housing. The
transponder mounting location is shown below.
transponder mounting location is shown below.
Note: You must mount the transponder module in the GainMaker Node housing before
you can configure it.
you can configure it.
WARNING:
Confirm the correct transponder type for your GainMaker Node before
installation! Damage may be caused by mounting the wrong type of transponder!
Refer to the table below for details.
installation! Damage may be caused by mounting the wrong type of transponder!
Refer to the table below for details.
Description
Part Number
DOCSIS®/EuroDOCSIS™ Transponder for GainMaker 4-Port Node
4039676
DOCSIS®/EuroDOCSIS™ Transponder for all other GainMaker Nodes
4039677