Cisco Model 6109 6 MHz Off-Air Reference (NTSC) インストールガイド
UCS USRM Rack Mounting
78-4021139-01 Rev D
37
Removing the USRM from the Rack
Follow these steps to remove the USRM from the rack.
CAUTION:
Avoid personal injury and damage to this product! Be sure to support the
Avoid personal injury and damage to this product! Be sure to support the
product from underneath until it is securely positioned in the rack. Failure to
do so could result in the product falling to the floor. The product could be
damaged and you could be injured as a result.
Note: You do not need to remove the optional front bezel to install or remove the
USRM from the rack.
1 Turn off the system and attached peripherals, and disconnect the system from
1 Turn off the system and attached peripherals, and disconnect the system from
the electrical power.
2 Disengage both thumbscrews on the front panel of the chassis.
3 Carefully pull the system forward and out of the rack.
3 Carefully pull the system forward and out of the rack.